Back to top

2 in 1 transformer

2 in 1 transformer

Product Details:

  • Rated Voltage 11000/433 Volt (V)
  • Cooling Type Oil & Air Cooled
  • Product Type transformer
  • Output 415, 440V
  • Frequency (MHz) 50 Hertz (HZ)
  • Efficiency 98%
  • Phase Three Phase
40000 INR
X

2 in 1 transformer Price And Quantity

  • 1 Set
  • 40000 INR

2 in 1 transformer Product Specifications

  • 98%
  • transformer
  • 415, 440V
  • 11000/433 Volt (V)
  • Oil & Air Cooled
  • Three Phase
  • 50 Hertz (HZ)

2 in 1 transformer Trade Information

  • Telegraphic Transfer (T/T) Cheque
  • 1 Set Per Day
  • 5-6 Week
  • Africa Western Europe Eastern Europe Central America Middle East South America Australia Asia North America
  • All India

Product Description

2 in 1 transformer

STANDARD SPECIFICATION

  • Capacity :Up to 10000 KVA
  • No. of Phases :3 Phase
  • Frequency :50 Hz.
  • Voltage Range :11 KV/ 33 KV
  • Tapping :-30% to +20%
  • Insulation :Class A
  • Vector Group :Dyn 11
  • Duty Cycle :Continuous
  • Winding :Copper Wound
  • Terminals :As per required

STANDARD FITTINGS

  • Rating & Diagram plate :Earthing terminals
  • Lifting lugs :Thermometer pocket
  • Oil Conservator with drain plug :Air release hole with plug
  • Oil Level indicator :Explosion vent with diaphragm
  • Top-filter Valve :Inspection cover
  • Silica gel breather :Drain cum-bottom-filter valve
  • Cooling radiators :Uni / Bi- directional rollers

ADVANTAGES

  • Utilization of the Distribution Transformer is to its full capacity as the H.T. AVR shares the load of the Transformer and the connected load.
  • Losses are less as the incoming voltage either low or high is corrected at the initial stage only.
  • Fluctuations in the H.T. Supply are not passed on to the Distribution Transformer.
  • Installation Cost is less in comparison to L.T. Automatic Servo Voltage Stabilizer, for higher ratings.
  • Single Unit of H.T. Automatic Servo Voltage Stabilizer can be connected to more than one Distribution Transformer.
  • Economical for huge capacities like 2500 KVA and above or for wide voltage fluctuation range (eg. 8 KV 13 KV, 28 KV 36 KV etc.)
  • Can be placed anywhere on the feeder line.
  • Motor fitting is external, so any change of the motor or motor shaft can be easily done without opening the top cover.
  • Output Voltage of H.T. AVR remains constant at any connected Load and up to full load.
  • Response time for Voltage correction is 20 micro seconds.
  • Low replacement cost
  • 5% to 10% saving on energy consumption
  • Reduction in breakdown period of the machines
  • 100% capacity
  • On Load step-less voltage variation

TECHNICAL ADVANTAGES

  • Low replacement cost.
  • Undistorted output characteristics ie. No wave from distortion.
  • Moving parts on L.T. side and its mass is extremely low, only few lb-inch torque.
  • Energy savings.
  • High efficiency (about 99%) and minimum no load losses.
  • Simplicity and flexibility of design
  • On load stepless voltage variation
  • Long service life
  • Impulse tested
  • Regulating coils are wound with rectangular conductors on their edge, thus giving high mechanical strength compared to other designs.

 

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Transformer' category



trade india member
RELIABLE POWER SYSTEMS All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.